1984 Chevrolet K30 Leaf Helper Spring Parts

Silverado 5.7L V8 change vehicle

Showing 1 - 2 of 2 products

Sort:

Show:

Image

SKU

Product

Rating

Price

LP-35 Heavy Duty Load Leveler Helper Springs
3500 lbs. Capacity; 4 Leaf Stack For Leaf Spring Applications; Requires PN[25250]; w/7 Leaves Requires PN[25400] Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
LP-35 Heavy Duty Load Leveler Helper Springs Dodge; Ford; GM. Check vehicle fitment.
LP-35 Heavy Duty Leaf Kit
Product Attributes:
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Adjustable Length: Yes
Features:
- Mounting Kit Sold Separately
- Designed For Full Time Users
- Fast Easy Bolt On Installation
- High Quality Spring Steel Leaves
- Raised Height/Spring Rate Vary On The Adjustment Of U-Bolts
- Limited Lifetime Warranty
The Hellwig LP-35 Helper Spring set the standard for all other aftermarket helper springs. Featuring a Progressive Rate design with up to 3,500lb level load weight capacity, it is the workhorse of the Hellwig Spring line. This is ideal for fleet applications or vehicles that consistently carry a heavy load day in and day out. ATTENTION: MUST PURCHASE LP MOUNGTING KIT FOR INSTALLATION. IF EQUIPPED WITH FACTORY CONTACT OVERLOAD SPRINGS CHECK VEHICLE FITMENT ABOVE FOR SPECIFIC INFORMATION ON YOUR YEAR AND MODEL VEHICLE.

Additional Fitment Information:

Vehicle
1984 - Chevrolet K30

1 In Stock

$593.71 CAD

$712.45 CAD

ADD-A-LEAFS FRT 67-87 GM
Lift Height 1.5-2 in.; w/Tie Bolts; Pair
FRT ADD-A-LEAFS CHEVY;DODGE
Softride Add-A-Leaf
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Softride(R) Add-a-leafs use only American steel and are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the leaf. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the leaf. The Skyjacker(R) add-a-leafs are pre-drilled for the center pin. Pin location varies with each application. Most have long tapered ends for a progressive affect and ride comfort.